Current position > News detail
『Flow Meter Cad Model Collections: 3D STEP Files for Flanged and Threaded Transmitters』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)
Flow Meter CAD Model Collections: 3D STEP Files for Flanged and Threaded Transmitters
Quick Answer: Silver Automation Instruments supplies 3D STEP files for flanged and threaded flow transmitters. Engineers can download these CAD models for piping isometrics, skid layouts, and plant digital twins. Files cover common DN sizes, process connections, and body dimensions to reduce rework during design.
What You Get in the CAD Model Collection
The flow meter CAD model collection includes STEP files for electromagnetic flow meters with ASME B16.5 and EN 1092-1 flanges. It also covers threaded oval gear meters with NPT and G thread connections. Pressure transmitters with flanged diaphragm seals and threaded process ports are part of the same library. Each model shows the outer envelope, cable entry points, and terminal box position. You can check clearance for wiring and manual access before the equipment arrives on site.
Most engineers skip this part and then face clashes near cable glands or support brackets. The STEP model does not include internal electronics details. It gives enough geometry for layout work without exposing proprietary internals.
Flanged Transmitter Models and Common Sizes
Flanged models cover sizes from DN10 to DN3000 for electromagnetic flow meters. Pressure and temperature transmitters with flanged connections follow common face to face and flange drilling standards. The files reference DN ratings, not vague scale blocks. A typical DN80 flanged flowmeter model matches the real body length and bolt circle. This matters for replacement projects in water and wastewater plants.
For oil and gas skid packages, the STEP files help pipe stress engineers and layout designers. A customer in Malaysia used the DN150 flanged electromagnetic model to place supports on a produced water skid. The drawing office completed the layout two days faster because flange face positions were fixed from the start.
Threaded Transmitter Models for Compact Skids
Threaded models cover small line sizes from DN4 to DN50. Applications include chemical dosing, fuel oil blending, food additive injection, and compressed air measurement. Threads are shown as simplified geometry with the correct outer form and engagement length. This is practical for clearance checks, not for thread manufacturing.
Here is the thing. In practice, a CAD file with true thread geometry is heavy and useless for plant layout. Our STEP files keep the thread outer diameter and spanner clearance, so the model stays light in EPLAN, AutoCAD Plant 3D, or Navisworks.
Last year a customer in Vietnam asked us for a DN25 threaded oval gear meter model for a polymer dosing skid. The model helped the team position the meter between two inline mixers without blocking the access walkway.
Industries That Use These CAD Models
Water and wastewater contractors use flanged models for desalination feed lines and sludge transfer systems. Chemical plants in Latin America use threaded models for dosing skids. Food and beverage factories use flanged process connection models for pasteurizer and CIP lines. Marine engineers use the models for fuel bunkering and ballast water treatment layouts. We have seen this on customer sites many times in Southeast Asia and the Middle East.
Because the library includes both flanged and threaded versions, procurement engineers can compare the same meter body across two connection styles. That helps when a project changes from socket weld to flanged during detailed design.
How to Request the Correct STEP File
Send us the pipe size, process connection standard, and transmitter type. For example, a typical request reads like this. DN100 electromagnetic flow meter, EN 1092-1 PN16 flange, remote display. We reply with the matching STEP file or a ZIP package for the full model collection. No generic placeholder models. No scaled blocks.
You can also state the installation orientation and terminal box direction. Compact models have the terminal box on the side. Remote versions have a separate display housing. The STEP file reflects this because cable routing depends on the terminal position.
Recommended Parameter and Model Pairing
For desalination plant intake lines, use a flanged electromagnetic flow meter from DN200 to DN600 with 4-20 mA HART output. For chemical dosing skids, use a threaded oval gear meter from DN4 to DN25 with PTFE gears. For compressed air lines in food plants, use a thermal mass flow meter with G1/2 or NPT 1/2 connections. These pairings match common project specifications in the regions we serve.
Pressure transmitters with threaded process ports fit many air and gas headers. Flanged diaphragm seal transmitters fit viscous media and high temperature lines. Ask for the STEP file that matches your electrical connection as well. M20 cable glands and 1/2 NPT conduit entries change the side clearance.
Contact Silver Automation Instruments for CAD Files
Send us your pressure (bar), temperature (°C), pipe size (DN), and flow range. We will reply with the relevant 3D STEP files and a commercial quote. Tel: +86-25-68650347. Whatsapp: +86-25-52155837. WeChat: +86 15365082610. Visit flow-meter.com.au for the full product range.
Because model names vary by project, include the instrument tag number in your request. That helps us match the correct body style and process connection from the factory drawings. We also support batch requests from EPC contractors who need full instrument libraries for a package unit.
FAQ
Does the STEP file include internal components?
No. The CAD model shows the outer body, process connections, terminal housing, and cable entries. It does not include coils, electrodes, gears, or sensor internals.
What file version do you provide?
We provide STEP AP214 and AP242 files by default. AP214 works with most plant design software. AP242 is available when you need more attribute data.
Can I get a native SolidWorks or Inventor part?
In most cases yes. Request the native format when you send the model number. STEP is the default for neutral CAD exchange.
Are the models to scale?
Yes. The models use millimeter units and 1 to 1 scale. A DN100 flange face is 100 mm nominal, and body lengths match factory drawings.
Do you charge for the CAD model collection?
No. We provide STEP files free with a quotation request. If you need a full instrument library for a project, share the instrument list and we will prepare the package.